RSS
Follow us on:
  • Recommend:
  • 0 Comments

Upgrade Guide

Installing PC memory, step by step.

3. Remove the Old RAM

(See Hardware Tips to determine whether this step is necessary.) If you need to remove SIMMs, work carefully. They're held in place by fragile metal or plastic clips that you must release before you remove the SIMM. Use your fingertips (again, remember to dispel static first) or a very small flathead screwdriver to gently push the clips aside (A). Then pivot the SIMM sideways (B); it should lift out easily without force. Take note of the notch on one edge of the SIMM--you'll need to remember its orientation to install the new SIMMs.

Most DIMM sockets have clips on either side that you easily push aside (C), although some older-generation DIMM sockets don't use them. DIMMs usually can be pulled straight up from their slots (D). If necessary, you can rock them very gently to release them.

Would you recommend this story? YES NO

  • Recommend:
  • 0 Comments
  • Speed Up Everything!

    PCWorld shows you the secrets to improve performance on all your hardware.

Lenovo Laptop Deals

Subscribe to the Daily Technology News Newsletter - 7 days a week

See All Newsletters »
Today's Special Offers