Extend Your Wi-Fi Range With a Parabolic Reflector

You can create a simple add-on for your router's antenna that will boost and focus the wireless signal. We show you how.

By Zack Stern, PCWorld

3 of 6

All Images
Related Articles

FCC May Kill LightSquared's Plans for Wireless Revolution
AT&T Wireless Bandwidth Throttling: The Backlash Has Begun
Mobile Explosion: Wireless Traffic Could Reach 10.8 Exabytes a Month by 2016
Free Service Offers Basic Enterprise Mobile Management
Google Wallet Suspends Prepaid Credit Card Functions

Would you recommend this slideshow? YES NO

Plot Your Parabola

Using the data that Parabola Calculator generated, plot your parabolic curve on a sheet of graph paper. Trace this curve onto cardboard or balsa wood.

Download and Run Parabola Calculator

Download Parabola Calculator to help you figure out the correct antenna shape. Enter a diameter and depth to represent the maximum size of reflector that your router's antenna(s) can physically accommodate. The software will create a table of points for you to plot onto graph paper.

Plot Your Parabola

Using the data that Parabola Calculator generated, plot your parabolic curve on a sheet of graph paper. Trace this curve onto cardboard or balsa wood.

Cut Out Your Curve

Cut the cardboard or wood along the traced line of your curve. Do this twice. These pieces will become the guides for your reflector.

Cut Some Metal

Next, cut a smooth piece of metal to serve as the reflective surface. The sheet should be long enough to fit neatly along the edge of your curved guides, with a width corresponding to the height of your router's antenna.

Glue and Mount the Reflector

Cut a small hole into the the focal point of each guide, and glue the reflector onto your guides. Once the glue dries, mount the reflector on your router's antenna and aim it in the direction that you want your signal to go.