Upgrade Your Xbox 360's Hard Drive on the Cheap

Save $150 by upgrading your 20GB Xbox 360 hard drive to 120GB without buying Microsoft's overpriced add-on.

By Zack Stern, PCWorld

6 of 7

All Images
Related Articles

zAPPed Makes Your iOS Gadgets Part of the Board Game
Sony PlayStation Vita: Powerful Handheld Gaming
Love and Romance in Game On Podcast #6
World of Minecraft: Gamers Recreate WoW in Minecraft
Geek 101: What Is Jailbreaking?

Would you recommend this slideshow? YES NO

Install the New Drive in the Xbox 360

Remove the newly formatted 120GB drive from your PC and install it into the Xbox 360 drive enclosure. Put the enclosure back together, reattach it to the console, and turn the console on. Follow the prompt under 'System, Memory' to format the new drive; after formatting is complete, the drive will be ready for use.

Open the Drive Enclosure

Use a Torx screwdriver to open the drive enclosure, exposing the interior drive cage. Next, remove the four screws holding the drive into the cage.

Slide Out the Drive

With the retaining screws removed, disconnect the drive from the SATA-and-power cable, and slide the drive out of the enclosure.

Install the New Drive in Your PC

With your PC turned off, unplug any other SATA devices and then connect the new Scorpio drive to one of the SATA cables and to a power lead.

Boot From the Thumb Drive and Format the Hard Drive

Afterward, boot from your DOS thumb drive (specify a boot drive in your PC's BIOS, if necessary). At the DOS command line, type "run hddhackr –f" (don't include the quotation marks) and press Enter. You'll be prompted to make a backup of the original drive firmware; do so. Continue with the process to flash the firmware on the new hard drive. After a few seconds, you'll be prompted to restart the computer. Once you have done so, run the "hddhackr –f" command again, and it should report that the hard drive has been formatted for the Xbox 360.