Manufacturer’s Description

The multichannel T1 Integrated Services Digital Network Primary Rate Interface port adapter PA-MC-4T1 is a single-wide module that integrates channel service unit functionality, data service unit functionality, and T1 channel support into the Cisco router. The PA-MC-4T1 provides four independent T1 connections via RJ-48C connectors. This T1 port adapter can provide up to 128 separate full-duplex HDLC fractional or full T1 channels.

The Specs

General
Category Other
Class Network Hardware
Additional Specifications
Connectivity Media 100 ohm STP
Manufacturer Sku PA-MC-4T1=
Parent Product Family (Not Specified)
Fiber - FDDI MIC (Media Interface Connector) (Not Applicable)
Fiber - FC (Not Applicable)
RJ-11 4-pin Modular Plug (Phone/Telco) (Not Applicable)
Fiber - Biconic (Not Applicable)
RJ-45 Twisted-Pair (Xbase-T) (Not Applicable)
UPC 746320134666
Management Supported (Not Applicable)
Base Warranty 3 Months (90 days)
AUI/DIX-DB-15 Thick-Coaxial (Xbase-5) (Not Applicable)
Technical Support Phone Number 800-553-2447
Fiber - ST (Straight Tip) (Not Applicable)
Labor Warranty (Not Applicable)
Network Status Indicators Activity Status|Disable Status|Partition Status
BNC Thin-Coaxial (Xbase-2) (Not Applicable)
Product Family High-End Routers
RJ-45 Station (UTP Cabled) Modular Plug (Not Applicable)
ISDN - U Interface (Not Applicable)
Fiber - VF-45 (Not Specified)
normalized-Processor Speed 0 MHz
Fibre Channel - DB-9 FC-AL Standard 9-pin D-shell (Not Applicable)
Technical Support URL http://www.cisco.com/pcgi-bin/feedback?which=problem&feedback_type=replace_type&referer=http://w
Brand Name Cisco
Case Pack Quantity 1
Fiber - SC (Subscriber Connector) (Not Applicable)
Environment Network Adapter
Frequency Band Key Features: Channelized T1, fractional T1, full rate T1, and ISDN PRI supportedInternal or network clocking selectable on each portLine and payload loopback capabilitiesFull bit error rate testing capabilities on any T1Alarm detection: alarm indicationSupport for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections T1/DSX1 version features:D4 (Super Frame [SF]) and Extended Superframe (ESF) framingAlternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encodingInternal and loop (recovered from network) clockingFull FDL support and FDL performance monitoring, according to configurable standard: ANSI T1.403 or AT&T TR 54016Selectable DSX-1 cable length in increments from 0 to 655 feetSelectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dBSelectable DS1 CSU receiver gain: 26 or 36 dBDS1 line protection per UL1459/1950, FCC part 68
Management Full support for DSX-1 Management Information Base (MIB, RFC 1406), including alarm detection and reportingDSX-1 MIB remote access supported
Speeds Supported 1.544 Mbps
Manufacturer Retail Type (Not Specified)
ISDN - S/T Interface (Not Applicable)
DB-9 Station (STP Cabled) 9-pin D-shell (Not Applicable)
Language Localization (Not Specified)
Shipping Weight 2.25 lb
Geographic Localization (Not Specified)
Manufacturer Description ATM T1 4port Module
Parts Warranty (Not Applicable)
Processor Type (Not Specified)
Interfaces/Ports Details 24 x Channel T1 WAN
Description High-End Routers Port and Service Adapters ATM T1
Product Line Series Model Port and Service Adapters
SKU PAMC4T1
Fiber - SMA (Not Applicable)
Fibre Channel - HSSDC (High-Speed Serial Data) (Not Applicable)
IBM Data Connector (Not Applicable)
Processor Speed (Not Specified)
Vendor CIS
Quick Glance
Network Architecture Supported ATM
Warranty
Warranty Information 90
More Info
URL http://www.cisco.com
Features
Installed Main Memory (Not Specified)
Installed Flash Memory (Not Specified)
Interfaces T1

Related Routers