Cisco Catalyst 2960 Intelligent Ethernet Switch is a new family of fixed-configuration standalone device that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, and branch office networks. The Catalyst 2960 offers integrated security, including network admission control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.
|Warranty Information||3 Year|
|Installed Main Memory||64 MB|
|Frequency Band||LAN Base Image installedEach dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, 1 port active.Configurable up to 8000 MAC addressesConfigurable up to 255 IGMP groupsSuperior Redundancy for Fault BackupIntegrated Cisco IOS Software Features for Bandwidth OptimizationGranular Rate LimitingNetworkwide Security Features|
|Twisted Pair Cable Standard||Category 5|
|Speeds Supported-Network||1000 Mbps|
|General Features||Auto-Negotiation|Auto-Sensing Per Device|LED Status Indicators|
|Max Voltage||120 V|
|Shared SFP Slot||Yes|
|Port/Expansion Slot Details||4 x Fast Ethernet Expansion Slot|
|Management||Cisco Network AssistantCiscoWorks SupportDevice managerCisco Express SetupCiscoView applicationCisco Network Assistant SoftwareAdvanced QoSTrivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized locationNetwork Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switchesCisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switchesCisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LANSwitching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirementsVLAN trunks can be created from any port using standards-based 802.1q taggingUp to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.Four thousand VLAN IDs are supportedVoice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshootingCisco VTP supports dynamic VLANs and dynamic trunk configuration across all switchesSNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band managementCisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery|
|Connectivity Media||Category 5 UTP 10/100/1000Base-T|
|Installed Flash Memory||32 MB|
|Network Architecture Supported||Ethernet - 100 Mbps Two-Pair (100BaseTX)|Ethernet - 10Mbps Twisted Pair (10BaseT)|Gigabit Ethernet - 1000 Mbps (1000BaseT)|
|Min Voltage||230 V|
|Number of Total Expansion Slots||4|
|Total Number of Network Ports||24|
|Redundant Power Supply||Yes|
|Network Status Indicators||Activity Status|Duplex Operation|Port Status|Power|
|Performance||35.7Mpps Forwarding Rate For 64-byte Packet|
|Media Type Supported||Twisted Pair|
|Number of Network (RJ-45) Ports||20|
|Number of SFP Slots||4|
|Type of Switch||Ethernet Switch|
|Standards||IEEE 802.3-LAN|IEEE 802.3ab|IEEE 802.3ad|IEEE 802.3U-LAN|IEEE 802.3x|IEEE 802.3z|
|Dimensions||1.73" Height x 17.50" Width x 12.90" Depth|
|Interfaces||20 x RJ-45 10/100/1000Base-T Network LAN|4 x RJ-45 10/100/1000Base-T Network Uplink|1 x RJ-45 Console Management|
|Number of Network Ports||24|
Related Switches & Hubs
The Juniper Networks EX4200 line of Ethernet switches with Virtual Chassis...
New (Promo item, while supplies last) WS-C2960CX-8PC-L 8XGB POE+, 2 1GB SF
The SRX240 Series gateways provide robust, next generation enterprise...
HP 2530 Switch Series consists of four fully managed Layer 2 edge...
Catalyst 2960-X series Software FeaturesAll Catalyst 2960-X Series...