The Emulex LP1050DC-F2 host bus adapters offers highly integrated 2Gbps Fibre Channel to PCI/PCI-X connectivity solutions for mid-range storage area networks. The LP1050DC-F2 HBAs deliver exceptional performance through the use of "Thor", Emulex's sixth generation Fibre Channel controller. The Thor high performance controller is a dual channel device that combines ARM9 microprocessors, 1Gig/2Gig SERDES, and an advanced Fibre Channel protocol engine into a single module. The LP1050DC-F2 is dual-channel HBA, in a low-profile PCI card form factor that adapts to either standard height or low profile server slots. Emulex LP1050DC-F2 HBAs feature specialized hardware, which yields superior performance in SANs and provides best in class server CPU off load. Emulex's HBA architecture delivers low latency and high throughput in switched fabric and arbitrated loop topologies, and in clustered environments.
|Warranty Information||3 Year|
|Temperature||-40F (-40C) to 158F (70C) Storage|
|Ports/Channels||2 x LC Fibre Channel|
|Frequency Band||Quad Data Rate (QDR) SRAM Unified Data Buffer & Code Space memory16 Buffer-to-Buffer Credits supported (per channel)1K+ Contexts Cached On board (per channel)3.3V signaling, 5V tolerantStandard bracket (low profile available)Airflow Required: 100 lf/mAutomatic topology and speed adaptionOn board hardware context cache for superior fabric support and high transaction performanceSupport for use of multiple concurrent protocols (SCSI & IP)Simultaneous on card support for remote boot support in x86 and Itanium (BootBIOS and EFI) environmentsEnd-to-end parity protection for high data integrity1Gig/2Gig SERDES|
|Backward Compatibility||PCI 32 MHz 32-bit|
|Management||cHBA API supportHBAnyware: HBA management suite|
|Connectivity Media||62.5/125 µm Multi-mode Optical Fiber Fibre Channel|
|Distance Support||492.13 ft 62.5/125 µm Multi-mode Optical Fiber @ 2 Gbps|
|Fibre Channel Class Support||Class 3|
|Humidity||5% to 95% Non-condensing Relative Humidity|
|Data Throughput||3.13 Gbps Fibre Channel|
|Power Consumption||13.10 W Maximum @ 133 MHz|
|Dimensions||2.54" Height x 6.60" Width|
|Slot/Port Type||PCI-X 133 MHz|PCI-X 100 MHz|PCI-X 66 MHz|
|Product Type||Fibre Channel Host Bus Adapter|
|System Type||Operating System: Windows Server 2003 Windows 2000 Windows NT NetWare Linux Hardware: x86 Intel Itanium Processor family|
Related Network Adapters
Dell/Qlogic QME2472 4GB FC HBA Mezzanine - Actual Mfg Part Number: NP630
Looking for a small and flexible solution for adding networking to a...
Enable M2M edge computing and effortlessly handle demanding applications...
Need to add 10/100 Modbus TCP Ethernet to your product? If you have serial...
Emulex LPE 12002, Dual Port 8Gb Fibre Channel HBA - Actual Mfg Part...