Manufacturer’s Description

The media converter features an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converter also allows the installer to test the integrity of fiber connection, by forcing the converter to communicate over the fiber cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fiberoptic test equipment.

The Specs

General
Category Other
Class Network Hardware
Height 1 in
Width 4.125 in
Depth 3.75 in
Additional Specifications
Connectivity Media 100Base-FX 1310 nm Multi-mode Fiber
Manufacturer Sku AT-MC101XL-10
Signal Processor Type converters
Parent Retsku B0000514JP
Number of ST Ports 1
Fiber - FC (Not Applicable)
Fiber - FDDI MIC (Media Interface Connector) (Not Applicable)
Altitude 0 ft to 10000 ft Operating
Number of Network (RJ-45) Ports 1
Product Model AT-MC101XL
RJ-11 4-pin Modular Plug (Phone/Telco) (Not Applicable)
Fiber - Biconic (Not Applicable)
UPC 767035123387
RJ-45 Twisted-Pair (Xbase-T) 1
Base Warranty Lifetime
AUI/DIX-DB-15 Thick-Coaxial (Xbase-5) (Not Applicable)
Fiber - ST (Straight Tip) 1
Labor Warranty (Not Applicable)
Technical Support Phone Number 800-428-4835
Fiber Mode Supported Multi-mode
Humidity 5 to 95% Operating
BNC Thin-Coaxial (Xbase-2) (Not Applicable)
Product Family Fast Ethernet Media Converters
RJ-45 Station (UTP Cabled) Modular Plug (Not Applicable)
ISDN - U Interface (Not Applicable)
Fiber - VF-45 (Not Specified)
Technical Support URL http://www.alliedtelesyn.com/support.htm
Fibre Channel - DB-9 FC-AL Standard 9-pin D-shell (Not Applicable)
Brand Name Allied Telesis
Case Pack Quantity 1
Fiber - SC (Subscriber Connector) (Not Applicable)
Frequency Band Half and Full Duplex operationTransparent to 802.1Q packetsFits the AT-MCR12 rackmount chassisMDI/MDIXMissingLinkLink Test External Power Supply:100-240vAC, 50/60Hz +/- 3% PACKET TRANSMISSION CHARACTERISTICS:Round Trip Delay: 0.4µs MaximumBit Error Rate (BER): < 10 -12 TWISTED PAIR INTERFACE:UTP Differential Output Voltage: - Typical: 980mv - Min: 950mv - Max: 1050mvOvershoot Voltage: - Typical: 4% - Max: 5%Single Amplitude Symmetry: - Typical: 1.0062 - Min: 0.98 - Max: 1.02Rise and Fall Time: - Rise: - Typical: 4.6ns - Min: 3.0ns - Max: 5.0ns - Fall: - Typical: 4.2ns - Min: 3.0ns - Max: 5.0nsRise and Fall Time Symmetry: - Typical: 0.4ns - Max: 0.5ns Port Type (Connector):100FX MMF: - Launch Power (dBm): - Max: -14.0 - Avg: -16.8 - Min: -19.0 - Receive Power (dBm): - Min. Sensitivity: -31.8 - Typical Sensitivity: -34.5 - Saturation: -14.0
normalized-Weight 10.4 oz
Speeds Supported 100 Mbps
Electronic Type organizers & pdas
Total Number of Ports 2
Manufacturer Retail Type (Not Specified)
ISDN - S/T Interface (Not Applicable)
DB-9 Station (STP Cabled) 9-pin D-shell (Not Applicable)
Language Localization (Not Specified)
Shipping Weight 2.31 lb
Geographic Localization (Not Specified)
Manufacturer Description Media Converter
Media Type Supported Optical Fiber
Parts Warranty (Not Applicable)
Product Series ATMC100
Description Fast Ethernet Media Converters AT-MC101XL 100BaseFX/100BaseTX (1)RJ-45 (1)ST
Product Line Series Model AT-MC101XL
SKU ATMC101XL10
Fiber - SMA (Not Applicable)
Distance Support 1.24 Mile
Fibre Channel - HSSDC (High-Speed Serial Data) (Not Applicable)
Temperature 32F (0C) to 104F (40C) Operating
IBM Data Connector (Not Applicable)
Maximum Distance Supported 1.24 Mile
Theme computers
Power Consumption 6 W Operating
normalized-Height 25.4
Vendor ALZ
Maximum Power Consumption 6 W
Network (RJ-45) Yes
Quick Glance
Network Architecture Supported Ethernet - 100 Mbps Fiber (100BaseFX)|Ethernet - 100 Mbps Two-Pair (100BaseTX)
Warranty
Warranty Information (Not Specified)
Dimensions
Weight 10.4 oz
More Info
URL http://www.alliedtelesyn.com/products/datasheets/prdmc101.htm
Features
Interfaces (Not Specified)

Related Routers