The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converterSupports auto-negotiation of duplex modes for easy installationExtends network distances up to 120kmSupports most network interfaces with a wide variety of cable and connector typesLabeled status LEDs and switches for quick and easy installationFeatures a crossover switch for connection to switches or workstationsWall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPointPowered ChassisCompletely software independent with no installation of drivers requiredPeace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
|Temperature||-40F (-40C) to 176F (80C) Storage|
|SC Port Type||Duplex|
|Number of SC Ports||1|
|Frequency Band||Auto-negotiates half-duplex (HD) or full-duplex (FD) operation to maximize data transfer speed and distance between connected devices. The FlexPoint 100Fx/Tx auto-adapts to the highest level of performance supported by the device connected to the UTP port. When the device is a switch or a workstation that supports full duplex, the FlexPoint 100Fx/Tx adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100Fx/Tx adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation. Switches: UTP Crossover: Straight/ Crossed UTP Auto-Negotiation: Auto-Negotiation/ Manual Duplex Mode: Full-Duplex/ Half-Duplex|
|Connectivity Media||100Base-FX 1310 nm Multi-mode Fiber|
|Distance Support||1.20 Mile|
|Signal Processor Type||converters|
|Total Number of Ports||2|
|Shipping Weight||1.46 lb|
|Humidity||0 to 90% Non-condensing Operating|
|Maximum Distance Supported||3.11 Mile|
|Media Type Supported||Twisted Pair|
|Fiber Mode Supported||Multi-mode|
|Country of Origin||United States|
|Number of Network (RJ-45) Ports||1|
The Cisco 10GBASE SFP+ modules offer customers a wide variety of 10...
The MM716 provides 24 analog ports supporting telephones, modem, and fax....
The Cisco industry-standard Small Form-factor Pluggable (SFP) Gigabit...
The Cisco 10GBase SFP+ modules offer customers a wide variety of 10...
The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit...