Manufacturer’s Description

Cisco Catalyst 2950T-24 is a member of the Catalyst 2950 Series Intelligent Ethernet Switches, and is a fixed-configuration, standalone switch that provides wire-speed Fast Ethernet and Gigabit Ethernet connectivity for midsized networks and the metro access edge. The Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), to the network edge-while maintaining the simplicity of traditional LAN switching. When a Catalyst 2950 Switch is combined with a Catalyst 3550 Series Switch, the solution can enable IP routing from the edge to the core of the network.Cisco Network Assistant is a free centralized management application that simplifies the administration task of Cisco switches, routers, and wireless access point. Cisco Network Assistant offers user-friendly GUI interface to easily configure, troubleshoot, and enable and monitor the network.

The Specs

General
Type of Switch Ethernet Switch
Category Switches
Class Network Hardware
Standards IGMP v3|PVST+|PAgP|VTP|DTP|TFTP|NTP|CDP|LACP|SNMP v1|SNMP 2c|SNMPv3|TACACS+|RADIUS|Telnet|TCP/IP|ARP|SMTP|FTP|STP|RSTP|MSTP
Additional Specifications
Frequency Band Enhanced Software Image (EI) installed8-MB memory architecture shared by all portsConfigurable maximum transmission unit (MTU) of up to 1530 bytesUse the supplied AC power cord to connect the AC power connector to an AC power outletDC input voltages for Cisco RPS 675: +12V @ 4.5A
Connectivity Media Category 5
Redundant Power Supply Yes
Management SNMPTelnetAn embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.CLI-based management consoleCiscoWorks network management softwareRTTMON-MIB allows users to monitor network performanceVLAN Membership Policy Server (VMPS)Cisco Cluster Management Suite (CMS)
Uplink Port Yes
normalized-Weight 104 oz
Layer Support 4
Depth 9.52 in
Port/Expansion Slot Details 2 x Gigabit Ethernet Uplink
Product Line Catalyst
Altitude 15000 ft Maximum Storage
Number of Network (RJ-45) Ports 24
Media Type Supported Twisted Pair
Product Model 2950T-24
Performance 6.6Mpps Forwarding Rate For 64-byte Packet
Product Series 2950
Width 17.5 in
Flash Power 8 K MAC Address - Maximum
Manageable Yes
Description 24PORT 10/100 WITH 2 10/100/1000BT PORTS
Modules Not Applicable
Network Architecture Supported Ethernet - 10 Mbps Twisted Pair (10BaseT)|Ethernet - 100 Mbps Two-Pair (100BaseTX)|Gigabit Ethernet - 1000 Mbps (1000BaseTX)
Temperature -13F (-25C) to 158F (70C) Storage
Height 1.72 in
Humidity 10% to 85% Non-condensing Relative Humidity Operating
Thermal Dissipation 102 BTU/h
Network Status Indicators Disable Status|Duplex Operation|Link Integrity|Link Status|Network Speed
MAC Address Table Size 8 K
Power Consumption 30 W @ Maximum
normalized-Height 43.688
Twisted Pair Cable Standard Category 5
Total Number of Network Ports 24
Brand Name Cisco
Flow Control IEEE 802.3x (Full-duplex)
Quick Glance
Interfaces 24 x RJ-45 10/100Base-TX LAN|2 x RJ-45 10/100/1000Base-T Uplink|1 x RJ-45 Console Management
Number of Network Ports 24
Dimensions
Weight 6.5 lbs
More Info
URL http://www.cisco.com
Warranty Information Lifetime

Related Switches & Hubs