The ADTRAN T1 ESF CSU is a full-featured T1 Channel Service Unit used to connect T1 data terminal equipment (DTE) such as a PBX, switch or channel bank to T1 facilities.Capable of interfacing to both B8ZS or AMI circuits, the T1 ESF CSU can convert signal formats or line code to integrate older equipment. The ESF CSU is designed to provide alarms, loopbacks, signal regeneration, line build-out, and surge protection, while maintaining 1s density for the DTE and T1 network.
|Temperature||-4F (-20C) to 158F (70C) Storage|
|Description||T1 ESF CSU (SMART16)-FT/T1 CSU|
|Shipping Weight||2.75 lb|
|Humidity||Up to 95% Non-condensing Relative Humidity|
|Frequency Band||Network Interface: - Specifications: ANSI T1.403, AT&T TR62411 - Framing: SF/ESF - ESF Format: ANSI T1.403, AT&T 54016 - Transmission Type: - Regenerative transparent: Network & DTEUser Testing: - Local: Payload/Line (NI), DTE (T1) - Remote: Payload/Line (NI) - Test Patterns: 1:8, All 0's, All 1'sPerformance Monitoring: - Performance Data: - BPVs/CRCs, ES, SES, UAS, %AS, %EF SEC - Alarms, Error Rates - Reports: NI information stored 24 hrs, every 15 min. - PRMS: - ANSI Performance Report - Messages (User Selectable)Equipment Interface: - Compliance: ANSI T1.403, AT&T 62411 - Receiver Performance: Automatic Line Build-out for 0-655 ft. - Keep Alive Signal: Unframed/framed "All 1's" loss of DTE signalUser Options: - Mounting: Single Slot in ADTRAN Smart 16 Chassis - Bantam Jacks: - Test Signal access to Network & DTE - Non-interrupt signal receive: Network & DTEConnectivity Technology: Cable|
The CyberPower Metered PDU15MV32F 32-Outlets PDU provides 120V 15A output....
Hot Swap BatteriesPlug-and-Play installation
For use with sealed lead acid batteries6V/12V switchable singe stage...
Liebert MPH is a flexible rack power distribution unit (PDU); a perfect...
200W DC Power Supply is ideal for commercial/land-mobile, ham and CB...