When you have a big business mailing, printing envelopes should not drag down the process. This is where the optional envelope feeder for HP LaserJet 4200 and 4300 series comes in. Your envelopes will be out in a flash.
|Total Media Capacity||75|
|Shipping Weight||7 lb|
|Frequency Band||The envelope feeder is inserted in Tray 1 after removing the envelope entrance cover inside the printer (Note: do not throw away the cover, replace when the envelope feeder isn't installed).Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes.Weight: The weight of the envelope paper should be 75 to 105 /m2 (20 to 28 lb), or jamming might result.Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inch) curl, and should not contain air. (Envelopes that trap air might cause problems).Condition: Make sure that envelopes are not wrinkled, nicked, or otherwise damaged.Sizes in Tray 1: Standard and custom sizes from 76 x 127 mm (3 x 5 inches) to 216 x 356 mm (8.5 x 14 inches).Sizes in the optional envelope feeder: Standard sizes from Monarch (#7-3/4) (98 x 191 mm, or 3.9 x 7.5 inches) to B5 (ISO) (176 x 250 mm, or 6.9 x 9.8 inches).Holds up to 75 envelopes to make business mailing simple and efficient.Maximize productivity in your home office or small business.Print professional-looking envelopes fast and conveniently.|
|Media Capacity||75 Envelope|
|Product Compatibility||HP LaserJet 4200, 4200dtn, 4200dtns, 4200dtnsl, 4200n, 4200tn, 4300, 4300dtn, 4300dtns, 4300dtnsl, 4300n, and 4300tn|
|Product Type||Envelope Feeder|
Related Printer Accessories
Office Planet® replacement drum unit for the Brother DR620 is guaranteed...
Part No : 42504. FORD: Quick coupler, female half. SHORT LINES: Quick...
Rioch B023-6295 Paper Discharge Tray
GENUINE OEM LITTLE WONDER PARTS - TINE ASSY FLAT LEFT 438LF
Packard PRL220 Packard Roll Out Switch Manual Reset