The Netopia 4622 T1 Router is a full-featured, stand-alone T1 router for connecting diverse local area networks (LANs) to the Internet and other remote networks. The Netopia 4622 T1 Router uses a high performance T1 line to provide your whole network with a high-speed connection to the outside world.
|Temperature||32F (0C) to 158F (70C) Storage|
|Frequency Band||Integrated T1 CSU/DSU for fractional or full T1 data service.Permanent connection to the Internet or remote sites at up to T1 speeds (1.54 Mbps).Wire-speed routing (up to 1.54 Mbps) for all packet sizes.Supports all major T1 deployment models, including ATM, HDLC (Cisco and Copper Mountain), Frame Relay, PPP, and PPP over Frame Relay.DS0 auto-detection for channelized T1 deployments.Eight-port 10/100BaseT Ethernet switch connects easily to an existing LAN environment.The Ethernet switch ports support auto-crossover and half- or full-duplex auto-sensing.Business-class routing features, such as RIP1, RIP2, static routes, and support for multiple subnets on the LAN.Network Address Translation (NAT), NAPT, and MultiNAT for flexible use of IP addresses and server hosting.Various QoS parameters, including ATM: UBR and CBR; IP: TOS bit prioritization.High availability solutions via LAN connected back-up default gateway router or dial-back via a modem connected to the console port.Built-in firewall, packet filtering on source/destination address, service, and protocol; up to 255 rules in up to 8 filter - sets.Built-in VPN acceleration for wire speed performance.PPTP VPN Gateway, supporting client or server termination.Up to 15 IPSec or PPTP VPN security associations (tunnels).Menu-driven interface via Telnet.Easy Setup with menu-driven interface.Console Tiered Access, 2 levels of configuration access.Configuration Management, up to 3 backup configurations.System diagnostics and logs.Command-line interface (CLI).TFTP or X-Modem download/upload of new firmware and configuration files.Utilities: ICMP ping, trace route, Telnet client, and Syslog client.|
|Management||SNMP network management: SNMPv1, SNMPv2, MIB-II (RFC 1213), Interface MIB (RFC 1229), Ethernet MIB (RFC 1643), Netopia MIB. Management/configuration methods: Serial console, remote modem console, Telnet, SNMP|
|Connectivity Media||Category 5 Twisted Pair 10/100Base-TX|
|Total Number of Ports||9|
|Shipping Weight||3.40 lb|
|Humidity||20% to 80% Non-condensing Relative Humidity|
|Number of RJ-48 Ports||1|
|Input Current||1.50 A|
|Number of Network (RJ-45) Ports||8|
|Dimensions||2.10" Height x 9.40" Width x 7.90" Depth|
|Number of Network Ports||9|
|Network Architecture Supported||Yes Ethernet (10/100 Mbps)|
|Interfaces||8 x RJ-45 10/100Base-TX LAN|1 x RJ-48 T1 WAN|1 x DB-9 Console Management|
Cisco 2600 and 3600 high-density analog voice/fax network modules provide...
Surf the Web, stream music, play online games, and make Internet calls....
What This Product DoesCreate a wired network in your home using the...
The TP-Link ADSL2+ Router (TD-8817/TD-8817B) is a 2-in-1 device that...
With Zhone's innovative, easy to use ADSL2+/R CPE family, service...