Manufacturer’s Description

MHL Impervo UV 5mil 25 x 250' Hardcoat Thermal Laminating Film MHL Impervo UV 5mil 25 x 250' films are high-performance thermal overlaminating films offering a hardcoat, highly scratch resistant surface. This exceptionally clear film provides moderate UV protection for indoor and short-term outdoor graphics. MHL Impervo UV is designed for the most demanding display conditions. Its protective, scratch-resistant surface is ideal for high-traffic areas, frequent handling, or where moisture is a concern. Get 25 x 250' of 5mil MHL Impervo UV Hardcoat film with every order. Product number MLL25205. Technical Specifications Film Width: 25 Film Length: 250' Film Thickness: 5.0mil Core Size: 3 Finish: Luster / Matte Base Film: 3.0mil (75 micron) polyester hardcoat Adhesive: 2.0mil (50 micron) co-extruded polyethylene copolymer Initial Tack: None Application Speed: 1' - 6' per minute Application Temperature: 190 F - 230 F Release Liner: None MHL Thermal Overlaminating Film Tips and Details MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced orange peel, greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications. All MHL films are suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications. These films also incorporate UV absorbers for excellent protection from damaging UV rays. Tips For Applying MHL UV Thermal Films: Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

The Specs

Additional Specifications
Artificial Tree Size 25
luggage size type 23 to 25"
Diameter less than 8"
Parent Retsku B00BNBG26Q
Quick Glance

Related Presentation Tools