The 4-port Promise SATA300 TX4 SATA controller offers a low-cost solution for connecting up to four of the latest, high-performance SATA 3Gb/s disk drives to PC motherboards with a PCI interface. While drive capabilities continue to advance at a fast rate, the vast majority of available motherboards still use the PCI interface to connect peripheral devices. With the SATA300 TX4, users can benefit from a flexible solution that connects the most advanced drives to their existing system, the ideal future-proofing upgrade.
|Interface Connection||4 x 7-pin SATA Serial ATA/300 Serial ATA|
|Host Transfer Rate||Up to 2.34 Gbps|
|Maximum Number of Devices Supported||Up to 4 x Serial ATA/300|
|Temperature||32F (0C) to 122F (50C) Operating|
|Included Components||Installation Software|Manual|
|Number of Network Ports||4|
|Humidity||5 to 95% Non-condensing Relative Humidity|
|Frequency Band||Supports Serial ATA tagged command queuing (TCQ)Serial ATAPI SupportSupports drives larger than 137GBSupports up to 4 Serial ATA devicesSupports up to 300MB/sec* transfers with CRC error-checkingNative Command Queuing (NCQ)Staggered Drive Spin-UpHDD Activity IndicationOnboard BIOS:Auto-identifies and configures drive and device typesBBS Compliant; Flash-Upgradeable* 300 MB/sec reflects the drive interface speed. Actual data transfer depends on drive make, motherboard, and PCI bus speed.|
|Product Model||SATA300 TX4|
|Warranty Information||3 Year Limited Warranty|
|Dimensions||2" Height x 4.69" Width|
|Controller Type||Serial ATA Controller|
|Interface Type||Serial ATA/300|
Related RAID & Storage Controllers
Stretch your dollar and save on brand name computers & electronics....
Dell PERC6/ i Integrated SAS Raid Controller Card for Dell PowerEdge.
Dell Perc H310 Raid Controller.
New Dell SAS 6iR 6/iR SAS / SATA Controller with Integrated RAID Cap
Dell 3.7V 7WHr Lithium Ion Primary Battery