Manufacturer's Description
JL Audio 300-4V2 Car Amplifier - 4 Channel - Class AB - 108dB SNR
JL Audio's Slash v2 amplifiers aren't just powerful, they're smart. As your battery voltage fluctuates while you drive, the Regulated, Intelligent Power Supply system maintains steady, consistent power at any impedance between 1.5 and 4 ohms and at any voltage between 11 and 14.4 volts. You'll get all the power, all the time, even with a wide range of speaker combinations.The 300/4v2 4-channel amplifier puts out 75 watts RMS per channel to your system, and JL Audio's patented Class-AB amp circuitry delivers exceptional, natural sound with extremely low distortion. The cast aluminum heatsinks dissipate heat quickly, giving these amps long lifespans and reliable operation. You can stack multiple Slash v2 amps, saving you valuable space in your trunk or cargo area.
Product Specifications for
JL Audio 300-4V2 Car Amplifier - 4 Channel - Class AB - 108dB SNR
| General |
| URL |
http://www.jlaudio.com |
| Warranty Information |
90 Limited |
| Dimensions |
2.36" Height x 13.40" Width x 9.25" Depth |
| Additional Specifications |
| Frequency Band |
Frequency Response: 5 Hz - 30 kHz (+0, -1dB) Differential-Balanced Input Topology: 2 pair of inputs On-board Crossover: Fully-variable (50 Hz - 5 kHz), selectable-slope / mode (12 or 24 dB / octave, LP or HP) for each pair of channels |
| Rated Power @ 4 Ohm |
4 x 75 W |
| Quick Glance |
| Total Peak Power Output |
300 W |
| Number of Channels |
4 |
| Amplifier Class |
Class AB |
| Bridgeable |
Yes |
| Power |
| Total RMS Power Output (4 Ohms) |
4 x 75 W|2 x 150 W |
| Total Peak Power Output |
300 W |
| Channel RMS Power Output (4 Ohms) |
4 x 75 W |
| Performance |
| Signal To Noise Ratio |
108 dB |
| Max Frequency Response |
30 kHz |
| Min Frequency Response |
5 Hz |
| Features |
| Amplifier Class |
Class AB |
| Bridging |
Yes |
| Number of Channels |
4 |
Most recent User Reviews for
JL Audio 300-4V2 Car Amplifier - 4 Channel - Class AB - 108dB SNR
Ad Choices