Hands On: Stereo Bluetooth and IPhone 3.0 Update

Today's Best Tech Deals

Picked by PCWorld's Editors

Top Deals On Great Products

Picked by Techconnect's Editors

One of the long-awaited features the iPhone 3.0 software update brings to the iPhone and iPod touch--specifically, the iPhone 3G and 3G S and the second-generation iPod touch--is Bluetooth's Advanced Audio Distribution Profile (A2DP). A2DP lets you stream stereo audio to other devices over Bluetooth; for example, so you can listen to music and other audio through wireless headphones or speakers or a Bluetooth-equipped car audio system without having to connect any cables. We briefly covered this new functionality in our review of the iPhone 3.0 software, but here's a more in-depth look.

I tested A2DP with an iPhone 3G and a second-generation iPod touch, connecting each to two different A2DP accessories: Altec Lansing's inMotion SoundBlade speaker system and BackBeat 903 stereo headset. Although neither device is officially Made For iPhone--no Bluetooth speakers or headphones are yet--both are standard A2DP accessories.

Pair and pair alike

You pair an A2DP accessory with your iPhone or iPod touch the same way you do a Bluetooth phone headset. One the iPhone or iPod, you launch the Settings app and go to General -> Bluetooth. Make sure Bluetooth is On, and you'll see the "searching" indicator next to Devices. Then you put your Bluetooth accessory into pairing mode; for most accessories, this involves holding down a connection button until an LED flashes blue and red. Tap on the accessory's name when it appears in the Devices list on your iPhone or iPod, and in a few seconds it should connect automatically. (Some accessories will require a passcode--usually 0000--when you connect; if so, a keypad will appear on the iPhone or iPod's screen.)

(Image Caption: Pairing an A2DP Bluetooth accessory with an iPhone)

Once the accessory is connected, all audio should automatically be sent to it. This includes audio from the iPod app, as well as sounds from games and other apps. If your iPhone or iPod is set to automatically check for e-mail, or you've enabled push or notifications, alert sounds are also played through the wireless audio accessory, with music fading out briefly when alerts sound.

If this doesn't happen automatically, you can make the switch manually using the iPod app: At the bottom of the Now Playing screen, tap the Bluetooth symbol to choose whether to send audio to the A2DP accessory or to play through the iPhone or iPod itself. (The latter option will be either Speaker, Headphones, or Dock Connector, depending on what accessories are physically connected to the player.)

Oddly, this audio-device screen is also the only way to switch audio back to the iPhone or iPod's own outputs apart from turning off the accessory or unpairing the two devices--not an issue if you're already listening to music, but a hassle if you're doing something else. I also occasionally experienced an issue where turning off an A2DP Bluetooth accessory before switching audio output back to the iPhone prevented me from restoring audio on the phone; I had to turn the accessory back on, wait for it to connect to the phone, switch audio routing back to the iPhone itself, and then turn off the accessory again.

Once you're streaming over Bluetooth, you control playback volume via controls on the external accessory; the iPhone or iPod's volume buttons are disabled when streaming stereo audio. This provides a consistent signal level, but it does have some drawbacks. The most obvious is that if you're streaming to a speaker system across the room, it can be a hassle to change the volume. But I also came across another issue: The Altec Lansing BackBeat 903 provides only three or four volume "steps" when used as a stereo headset, and the lowest level was still too loud for me in a quiet room; I don't know how many other stereo headsets share this quirk. (If you're using an A2DP device that also lets you take and make phone calls--more on this below--you'll still be able to adjust call volume via the iPhone's volume controls.) It's also worth noting that you can't send non-phone-call audio to a standard (mono) Bluetooth headset.

Answering the call

With A2DP accessories that also include a microphone and phone features, you can take and make iPhone calls without having to set up a separate device. For example, the inMotion SoundBlade can act as a Bluetooth speakerphone, and the BackBeat 903 switches to mono mode and functions as a Bluetooth headset. When a call comes in, music or other audio fades out, just as it does on the iPhone, and the speaker or headset system plays its own "ringer" tones. Pressing the Connect/Answer button on the accessory answers the call; on most accessories, pressing the button again ends the call, resuming audio streaming. (Depending on the accessory, the button may also provide other call functions; for example, a quick double-press may redial the last number called.)

Of course, as with most Bluetooth accessories I've used, you can confuse things by answering calls on the phone itself. For example, in my testing, answering a call on the phone--by tapping the Answer button on the phone's screen--caused the phone to reroute call audio from the SoundBlade or BackBeat headset to the phone; I had to manually route it back to the Bluetooth device. And if I answered a call on the phone while music was playing, when I hung up the call and playback resumed, audio was played through the iPhone; I had to manually switch back to the headset or speakers.

If you've got multiple Bluetooth accessories--for example, a standard phone headset and a set of A2DP speakers--things get a little messier. While the iPhone and iPod touch can be paired with multiple devices simultaneously, only a single Bluetooth accessory can maintain an active connection with the iPhone or iPod at any time. If you're listening to music through a Bluetooth speaker system and a phone call comes in, you can answer the call on your favorite Bluetooth headset by pressing the headset's Connect button to connect with your iPhone, but doing so drops the connection with the speakers. When the call is over, you must reconnect with the speakers (which disconnects the headset).

The sound of streaming

Bluetooth audio streaming is mighty appealing, but it's not without caveats. For audiophiles, the most significant is that audio is lossily compressed in order to avoid saturating the Bluetooth connection--nobody likes stutters and skips when listening to music. But the reality is that unless you have a set of high-end wireless headphones or you're streaming to a very good stereo system, you're unlikely to notice this compression, especially if you're playing low-bit-rate audio files. (Etymotic's ety8 is the only true high-end set of A2DP headphones I'm aware of right now.) You'd surely be more annoyed if playback was choppy.

(Image Caption: Switching audio output to Bluetooth speakers)

Speaking of which, during several days of A2DP testing, audio playback over Bluetooth was generally smooth. The one thing that regularly produced a skip or stutter was when new e-mail arrived. To be fair, such events often bog down whatever the iPhone is doing; games regularly slow to a crawl when the iPhone receives new messages. Hopefully the improved hardware in the iPhone 3G S will improve on this.

In terms of range, I was able to stream audio from an iPhone 3G to a Bluetooth speaker system approximately 18 feet away through two interior walls. When streaming audio, if you exceed the connection range briefly, the connection will be automatically restored as soon as you come back in range (playback continues on your iPhone even when you're out of range of the A2DP accessory). If you go out of range for longer than a few minutes, you'll lose the connection completely. When this happened, after coming back into range I had to "wake up" the wireless connection to resume wireless streaming, either by pressing the Connect button on the wireless accessory or by tapping on the accessory name in Bluetooth settings on the iPhone or iPod. (If you turn off your Bluetooth accessory, the connection terminates; turning on the accessory automatically restores the connection, presuming you haven't manually unpaired the two devices.)

Finally, I experienced a few occasions where WiFi signal strength dropped while streaming audio over Bluetooth, although this didn't happen every time. Since we haven't yet been able to test an iPhone 3G S, we don't know if this will also be an issue with the latest iPhone.

'Tooth to power

Perhaps the biggest drawback of A2DP Bluetooth streaming is its effect on battery life. As anyone who's undertaken extended Web-browsing sessions on their iPhone or iPod touch can attest, wireless connections and long battery life aren't good friends. And while Bluetooth doesn't require as much power as WiFi, streaming audio over Bluetooth noticeably shortens your battery life. I didn't perform any controlled tests, but my anecdotal observations over several days of use indicate that A2DP streaming cuts battery life at least in half.

Lose control

While the addition of A2DP support is welcome, it looks like we'll have to wait even longer for support for Bluetooth's Audio/Video Remote Control Profile (AVRCP). This feature of Bluetooth allows a Bluetooth accessory to control media playback via buttons on the accessory itself. For example, both the BackBeat 903 and inMotion SoundBlade provide Play/Pause, Back, and Forward buttons; other accessories include controls for browsing menus and other advanced actions. But when these accessories are used with the iPhone or iPod touch, only the Play/Pause button works. (We haven't had a chance to test these features on the iPhone 3G S, which has yet to be released as this article was published.)

3G S on the way

We'll be getting our curious hands on an iPhone 3G S later on Friday, and we'll start testing these features to see if Apple's latest phone handles A2DP and AVRCP any differently. If so, look for an update to this article to reflect those differences.

[Dan Frakes is a senior editor for Macworld.]

This story, "Hands On: Stereo Bluetooth and IPhone 3.0 Update" was originally published by Macworld.

Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read our affiliate link policy for more details.
Shop Tech Products at Amazon