Upgrade Your Motherboard

Today's Best Tech Deals

Picked by PCWorld's Editors

Top Deals On Great Products

Picked by Techconnect's Editors

Upgrade Your Motherboard
The motherboard is probably the most complex PC component to upgrade, but modern operating systems and standards have taken much of the pain out of swapping in a new one. (Even so, ancillary issues such as software activation make the task of upgrading a motherboard more annoying rather than less.)

Before choosing a motherboard, you need to understand the purpose of the system you're upgrading or building. Will it be small in volume? If so, you'll want to use a micro ATX or mini ITX board. Are you planning to overclock? Then you'll want to in­­corporate a board that offers robust voltage regulation and good cooling over those voltage regulator modules (VRMs). Looking to build a minimalist office PC? Make sure it has built-in video output connectors and low cost.

Other complications exist, particularly if you're upgrading an Intel-based system. Intel now has four active socket formats: LGA775, LGA1156, LGA1366, and (the latest) LGA1155. If you will be upgrading your existing processor, too, confirm that your new motherboard has the correct socket for it. Upgrading an AMD CPU is a little easier: Most socket AM3 boards support all AMD CPUs.

Also, check the size and capacity of your existing system, if you are upgrading. If the case supports ATX motherboards, anything ATX-size or smaller will fit. If you have an older BTX-format case, it will probably support ATX motherboards, too, but you should check with the case manufacturer to make sure. And finally, Extended ATX (eATX) motherboards are somewhat larger than ATX boards; they are fairly rare and are usually workstation-class boards that support more than one processor.

Upgrading Tips

Here's a basic walkthrough of a motherboard upgrade.

1. Set up a workspace, and make sure that it provides you with adequate lighting. Also, be sure to give yourself enough room to lay out tools and parts. Good lighting is especially critical if your case has an all-black interior.

2. Prior to disassembling the system, back up the contents of your hard drive.

3. Collect all CD keys. De­­activate or deauthorize any applications that you activated previously. This includes iTunes and Adobe professional apps (such as Photoshop and Premiere CS5). In addition, be sure to uninstall or deactivate any games that required activation.

4. Determine which parts need to be removed. You may have to take out the power supply unit (PSU) or hard drives to make motherboard re­­moval easier. If you have to remove the PSU, take care to disconnect all power cables first. The ATX12V (a small four- or eight-pin connector) is easy to overlook.

5. Take out all cards, the CPU fan, and all memory. If you're not upgrading the CPU, you can leave it in the socket for the moment.

Disconncet all wiring
Prior to removing the old board, disconnect all wiring, ?including the Serial ATA connector.
6. Disconnect all wiring. Double check: Did you really disconnect all wiring?

7. Remove all the screws holding the motherboard in place. Usually, a number 2 Phillips screwdriver will fit the screws. Place the old board in an antistatic bag.

8. Check to confirm that all of the mounting nuts are firmly screwed into the case. Sometimes, these nuts will come out or become loose when you remove the motherboard screws.

9. Remove the ATX I/O shield, and store it with the old motherboard.

Install the ATX I/O shield
Don’t forget to remove the old ATX I/O shield, and install the new one in its place.
10. Install the ATX I/O shield for the new board. This step is crucial: It's frustrating to have screwed in the new motherboard and only then realize that you forgot about the I/O shield.

11. Are you using an exotic cooler? If so, it may require that a special support plate be attached to the underside of the motherboard.

12. Line up the I/O ports with the holes in the ATX I/O shield. Then align the screw holes with the motherboard mounting nuts on the interior of the case.

13. Carefully screw in the mounting screws. Do not overtighten them. If you have an electric screwdriver equipped with an adjustable clutch, set the clutch to the minimum setting. If your electric screwdriver doesn't have a clutch, use a hand screwdriver instead.

Mounting the harddrive
Before reattaching the wiring and cables, reinstall any storage devices (like this hard drive) that you removed earlier.
14. Reinstall the power supply unit, if you removed it earlier. Also reinstall any storage devices that you may have removed.

15. Reattach all of the wiring and cables that you disconnected earlier: front panel connectors, USB wiring for the USB case connectors, power cables, wires for the case fan, and so on. If your case allows you to route wiring behind the motherboard, do so now.

16. Attach the power cables, taking care to connect both the main and the ATX12V cables.

Mounting the CPU cooler on the motherboard
After installing the new motherboard and memory and reattaching the power cables, add back the CPU cooler and lock ?it in place with the fan clips.
17. Install the CPU (if you had to remove it earlier) and the memory. Don't install the CPU cooler until after you've installed the memory and the power connectors.

18. Plug in the data cables and the power connectors to the storage devices.

19. Reinstall any cards you may have removed. If you're installing a high-performance graphics card, make sure that you attach the PCI Express power connectors.

20. Connect wall power, the video cable, the mouse, and the keyboard, and give the system a test boot. If nothing happens, make sure that the PSU switch is on.

21. When you boot the system (assuming that you're using Windows), you'll need to wait while Windows ac­­counts for all of the new motherboard devices. Your keyboard and mouse may be unusable during this time.

22. Once Windows has logged all of the devices, you will have to reboot.

23. Take the motherboard CD and install the new motherboard drivers, network drivers, video drivers (only if you're using integrated graphics), USB 3.0 drivers, and so on. You may need to reboot several times.

24. Once you've done all of this, check to see whether Windows needs to be reactivated. If so, first try activating over the Internet. If this fails, call the toll-free number listed in the Activation Window. If you do activate over the phone, be sure you tell Microsoft that you're installing this copy of Windows on one system. This is just an upgrade after all.

25. Reinstall and reactivate any needed applications.

26. You should be set to go.

Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read our affiliate link policy for more details.
Shop Tech Products at Amazon