In a nutshell, the adapter allows you to connect an internal hard drive to your PC—externally. What would an internal drive be doing outside your desktop or laptop? Funny you should ask.
About a week ago, my media-center PC starting displaying this message during boot-up: “Hard drive failure imminent.” And you know what? It was. In short order, the machine wouldn’t boot at all.
Long story short, I had to replace the drive, reinstall Windows, etc. But I wondered if I could salvage any/all of my recorded TV shows. To find out, I connected the old, non-booting drive (now “naked” outside the system) to a USB port via my adapter.
Huzzah! The machine was able to read the drive and copy over the recordings. Except for the hassles (and expense) of actually replacing the drive, no harm done.
There’s another reason to keep one of these adapters on hand, and that’s if you’re planning to upgrade to a solid-state drive (SSD). Unless you buy a kit that comes with an adapter, you’ll need one so you can image (i.e. clone) your existing drive to the new SSD. Then you’ll remove the old drive, install the new one, and presto, you’re back in business. (Much faster business: SSDs rock.)
Unless you have a pretty old desktop or laptop, you can skip buying a USB-to-IDE/SATA adapter and just go for USB-to-SATA. At the same time, I recommend one that supports USB 3.0. You may not need it now, but it’s a good bet your next PC will have USB 3.0 ports — and that’ll make for much faster copying between drives.
For more than 20 years, Rick Broida has written about all manner of technology, from Amigas to business servers to PalmPilots. His credits include dozens of books, blogs, and magazines. He sleeps with an iPad under his pillow.